# Shell Field Guide

## 1 Introduction

This booklet is intended to be a catalog of tricks and techniques you may want to use if you're doing some sort of complex scripting. Some are useful in "The Real World (TM)", some are more playful, and might not have such direct impact in your day-to-day life. Some are pure entertainment. You'll have to judge by yourself which belong to which. I'll try to keep the rhetoric to the minimum to maximize signal/noise.

The git repo is at https://github.com/kidd/scripting-field-guide/. Any feedback is greatly appreciated. Keep in mind this is not any kind of official doc. I just write MY current "state of the art" and I'll be updating the contents with useful stuff I find or discover, that are not widely explained in usual manuals/wikis.

You surely have some amount of sh/bash/zsh in your stack that probably started as one-off scripts, and later grew and were copypasted everywhere in your pipelines, repos, coworkers' ~/bin, or your coworkers use for their own things (with some variations), etc. Those scripts are very difficult to kill and they have a very high mutation rate.

## 2 Which Shell?

No matter if you use Linux, Mac, or Windows, you should be living most of the time in a shell to enjoy the content shown here. Some value comes from running scripts, and some comes from the daily usage and refinement of your helper functions, aliases, etc. in interactive mode.

In general the examples here are meant to run in Bash or Zsh, which are compatible for the most part.

## 3 Level

These examples are based on non-trivial real world code I've written using patterns I haven't seen applied in many places over the net. A few of the snippets are stolen from public repos I find interesting. Also, important scripting stuff might be missing if I don't feel I have anything to add to the generally available info around.

## 4 Patterns

### 4.1 Use Shellcheck

First, let's get that out of the way. This is low-hanging fruit. And you will get the most of this booklet by following it.

A lot of the most common errors we usually make are well known ones. And in fact, we all usually fail in similar ways. Bash is known for being error prone when dealing with testing variable values, string operations, or flaky subshells and pipes.

Installing shellcheck will flag many of those ticking bombs for you.

No matter which editor you are using, you should be able to install a plugin to do automatic checks while you're editing.

In emacs' case, the package is called flymake-shellcheck, and a quick configuration for it is:

(use-package flymake-shellcheck
:ensure t
:init


Shellcheck is available on most distros, so it's just an apt, brew, or nix-env away.

### 4.2 Booleans and Conditionals

In any shell, foo && bar will execute bar only if foo succeeded. That means that foo returned 0. That means that to && (which you read like "and"), 0 is true. so yes. 0 is true, and other values are false.

### 4.3 Arrays

Ordered list of things.

foo=("ls" "/tmp/")

echo ${foo[-2]} echo${foo[-1]}
echo ${foo[0]} echo${foo[1]}
echo ${foo[2]} for i in "${foo[@]}"; do
echo $i done$foo
${foo[*]}${foo[@]}
echo ${#foo[*]} echo${#foo[@]}


Are * and @ equal? nope.

"${foo[@]}" "${foo[*]}"

#!/bin/bash

main()
{
echo 'MAIN sees ' $# ' args' } main$*
main $@ main "$*"
main "[email protected]"

### end ###


and I run it like this:

my_script 'a b c' d e

### 4.4 Pass Arrays around

a=('Track 01.mp3' 'Track 02.mp3')
myfun "${a[@]}" # pass array to a function b=( "${a[@]}" ) # copy array


Read the great Oil Shell blogpost.

### 4.5 Slurping arrays

A nice way to read a bunch of elements in one go is to use readarray.

parse_args() {
[[ $# -eq 0 ]] && die "Usage:$0 <version>"
version="$1" local version_split=$(echo $version | tr '.' '\n') readarray -t version_array <<< "$version_split"

if [[ -z ${version_array[3]} ]]; then die "not enough version numbers" fi }  Even nicer would be to use IFS so we'd be able to split in one go. IFS=. read -a ver <<<"1.23.1.0" echo${ver[0]}
echo "next/${ver[0]}.${ver[1]}.x.x"


Or, use it in a destructuring fashion:

get_nix_version_parts(){
local major minor patch
# shellcheck disable=SC2034,SC2162
IFS="." read major minor patch < <(get_nix_version)
local -p
}

$get_nix_version_parts major=2 minor=3 patch=4  ### 4.6 Read lines from file The read command we used just above is part of the usual idiom to read a file line by line. while read -r line; do echo$line
done < /tmp/file.txt


More related info in the BashFAQ001. But it's very rare the case where I need to iterate a file line by line.

echo $@  See? here's how to "unshift" a parameter to the current arg list: set -- "injected" "[email protected]"  ### 4.8 Functions Functions are functions. They receive arguments, and they return a value. The special thing about shell functions is that they also can use the file descriptors of the process. That means that they "inherit" STDIN, STDOUT, STDERR (and maybe more). Use them. Another point is that function names can be passed as parameters, because they are passed as strings, but you can call them inside as functions again. Maybe they are better than you think. f() {$1 hi
}

f echo
f touch # will create a file 'hi'


### 4.9 Variables

By default variables are global, to a file. No matter if you assign them for the first time inside a function, or at the top level.

foo=3
bar=$foo f() { echo$bar
}
f

f() {
bar=1
}
f
echo $bar  You make a variable local to a function with local. Use it as much as you can (kinda obvious). myfun() { local bar bar=3 echo$bar
}

bar=4
echo $bar myfun echo$bar


### 4.10 Variable Expansions

They offer some variable manipulations using shell only, not having to create another process sed,awk,perl.

v=banana
# substitute one
echo ${v/na/NA} # baNAna # substitute many echo${v//na/NA}  # baNANA

# substitute from the start (think ^ in PCRE)
echo ${v/#ba/NA} # NAnana # substitute from the end echo${v/%na/NA}  # banaNA

# Capitalize
echo ${v^} # Banana # Uppercase echo${v^^}  # BANANA


Take a read on https://tldp.org/LDP/abs/html/manipulatingvars.html and https://www.gnu.org/software/bash/manual/html_node/Shell-Parameter-Expansion.html for more details.

And a nice non-obvious trick from here is to prefix or suffix a variable string:

v=banana
echo ${v/%/na} # bananana echo${v/#/na}   # nabanana


And a less obvious trick is to prefix every element of an array with a fixed string:

local arr=(var1=1 var2=2)
echo ${arr[*]/#/"--env "}  This will produce --env var1=1 --env var2=2. Super useful to be combined when building flags for docker. Another nice trick is a portable realpath$PWD with ${0%/*}, which I found in picolisp's vip: #!/bin/sh exec${0%/*}/bin/picolisp ${0%/*}/lib.l @bin/vip "[email protected]"  ${0%/*}/bin/picolisp will replace keep the path of the current script and append /bin/picolisp. A cool way to get a realpath.

### 4.11 Interpolation

We previously saw that functions can be passed around as strings, and be called later on.

Something that might not be obvious is that the string can be created from shorter strings, and that allows for an extra flexibility, that comes with its own dangers, but it's a very useful pattern to dispatch functions based on user input or function outputs.

l=l
s=s
$l$s .


### 4.12 dispatch functions using args

A nice usage of the previous technique is using user input as a dispatching method.

You've probably seen this pattern already:

while [[ $# -gt 0 ]]; do case$1 in
foo)
foo
;;
*)
exit 1
;;
esac
shift
done


And it is useful for its own good, and flexible.

But for some simpler cases, we can dispatch based on the variable itself:

cmd_foo() {
do-something
}

echo "$(typeset -F | grep cmd_ | sed -e 's/.*cmd_/cmd_/')" } cmd_foo() { echo "foo" } cmd_baz() { echo "baz" } cmd_bar  You can unset the function command_not_found_handle to go back to the normal behavior. ### 4.14 Return Values for Conditionals if 's test condition can use the return values of commands. That's a known thing, but a lot of code you see around relies on [[]] to test the return values of commands/functions anyway. if echo "foo" | grep "bar" ; then echo "found!" fi  This is much clearer than if [[ ! -z$( echo "foo" | grep "bar") ]]; then
echo "found!"
fi


As easy and trivial as it seems, this way of thinking pushes you forward to thinking about creating smaller functions that check the conditions and return 0 or non 0. It's syntactically smaller, and usually makes you play by the rules of the commands, more than just finding your way around the output strings.

if less_than $package "1.3.2"; then die "can't proceed" fi  ### 4.15 set variable in an "if" test Usual pattern to capture the output of a command and branch depending on its return value is: res="$(... whatever ...)"
if [ "$?" -eq 0 ]; then ... ... fi  Well, you can test the return value AND capture the output at the same time! if res="$(...)"; then
...
fi


Unfortunately, it doesnt' work with local, so you can't be defining a local var in the same line. So, the variable is either global, or you spent a line to declare it local before. Still, I think I prefer to have a line to declare the variable as local rather than having explicit $?'s around. local var1 if var1=$(f); then

while(($#)) ; do #... shift done  And here's a pseudo-repl that keeps shooting one-off commands. This will keep shooting tr commands to whatever strings you give it, with the usual rlwrap goodies. while rlwrap -o -S'>> ' tr a-z A-Z ; do :; done  Note: : is a nop builtin in bash. ### 4.17 One Branch Conditionals The usual conditionals one sees everywhere look like if. if [[ some-condition ]]; then echo "yes" fi  This is all good and fine, but in the same vein of using the least powerful construct for each task, it's nice to think of the one way conditionals in the form of && and || as a way to explicitly say that we don't want to do anything else when the condition is not met. It's a hint to the reader. some-condition || { echo "log: warning!" } other-condition && { echo "log: all cool" }  This conveys the intention of doing something just in one case, and that the negation of this is not interesting at all. There's a big warning you have to be aware of. The same as with lua's ... and .. or .., bash || and && are not interchangeable for if...else...end. BashWiki has an explanation why, but, the same as in Lua's case, if the "then" part returns false, the else will run. There are lots of references to this, but I like this recent post where it explains it for arrays in higher level languages like ruby: https://jesseduffield.com/array-functions-and-the-rule-of-least-power/ An extended article of this kind of conditionals can be found here. ### 4.18 pushd/popd pushd and popd are used to move to some directory and go back to it in a stack fashion, so nesting can happen and you never lose track. The problem is that it still is on you to have a popd per pushd. pushd /tmp/my-dir echo$PWD
popd


Here's an alternative way, that at least makes sure that you close all pushd with a popd.

Starting a new shell and cd-ing , will make all commands in that subshell be in that directory, and will come back to the old directory after closing the new spawned shell.

(cd /tmp/my-dir
ls
)


Remember to inherit_errexit or set -e inside the subshell if you need. That's a very easy trap to fall into.

### 4.19 wrap functions

Bash can't pass blocks of code around, but the alternative is to pass functions. More on that later.

mute() {
"[email protected]" >/dev/null
}

mute pushd /tmp/foobar


### 4.20 use [[

Unless you want your script to be POSIX compliant, use [[ instead of [. [ is a regular command. It's like ls, or true. You can check it by searching for a file named [ in your path.

Being a normal command it always evaluates its params, like a regular function. On the other hand though, [[ is a special bash operator, and it evaluates the parameters lazily.

# [[ does lazy evaluation:
[[ a = b && $(echo foo >&2) ]] # [ does not: [ a = b -a "$(echo foo >&2)” ]


### 4.21 eval?

When you have mostly small functions that are mostly pure, you compose them like you'd do in any other language.

In the following snippet, we are in a release script. Some step builds a package inside a docker container, another step tests a package already built.

A nice way to build ubuntus, for example, is to add an ARG to the Dockerfile so we can build several ubuntu versions using the same file.

It'd look like this:

ARG VERSION
FROM ubuntu:$VERSION RUN apt-get ... ...  We build that image and do all the building inside it, mounting a volume shared with our host, so we can extract our .deb file easily. After that, to do some smoke tests on the package, the idea is to install the .deb file in a fresh ubuntu image. Let's pick the same base image we picked to build the package. # evaluate the string "centos:$VERSION" (that comes from
# centos/Dockerfile) in the current scope
# DISTRO is ubuntu:18.04
local VERSION=$(get_version$DISTRO) # VERSION==18.04
run_test "file.deb" "$(eval echo$(awk '/^FROM /{print $2; exit}'$LOCAL_PATH/$(get_dockerfile_for$DISTRO)))" # ubuntu:18.04


The usage of eval is there to interpolate the string that we get from the FROM in the current environment.

WARNING: You know, anything that uses eval is dangerous per se. Do not use it unless you know very well what you're doing AND the input is 100% under your control. Usually, more restricted commands can achieve what you want to do. In this particular case, you could use envsubst, or just manually replace $\{?VERSION\}? in a sed. test_release "$PACKAGE_PATH" $(awk '/^FROM /{print$2; exit}' $LOCAL_PATH/$(get_dockerfile_for $DISTRO) | sed -e "s/\$VERSION/$VERSION/")  Yet another way is using shell parameter expansions. var1=value echo 'this is$var1' >/tmp/f.txt
f=$(cat /tmp/f.txt) echo "${f}"  # this is $var1 echo "${[email protected]}"  # this is value


### 4.22 pass commands around

This one uses DRY_RUN. While refactoring a script that does some curls, we want to make sure that our refactored version does the exact same calls in the same order.

compare_outputs() {
export DRY_RUN=1
git checkout b1
$@ 2>/tmp/1.out git checkout b2$@ 2>/tmp/2.out
echo "diffing"
diff /tmp/1.out /tmp/2.out
}
compare_outputs ./release.sh -p rhel:6 -R 'internal-preview'


First we create a function compare_outputs, that gets a command to run as parameters. The function will run it once, redirecting the standard error to a file /tmp/1.out.

Then, it checks out the branch that contains our refactored version, and will run the command again, redirecting standard error to /tmp/2.out, and will diff the two outputs.

In case there's a difference between the two, diff will output them, and the function will return the non-zero exit value of diff. If everything went fine, compare_outputs will succeed.

Now that we know that for these inputs the command runs fine, we want to find out if it works for other types of releases, not only internal-preview.

Here I'm using zsh's global aliases to give a much more fluid interface to the commands, but you can use the regular while/for loops:

alias -g SPLIT='| tr " " "\n" '
alias -g FORI='| while read i ; do '
alias -g IROF='; done '

set -e
echo "ga internal-preview rc1 rc2" SPLIT FORI
noglob compare_outputs ./release.sh -p rhel:8 -R "$i" IROF  So, combining the two, we can have a really smooth way of iterating over the possibilities, without really messing into the details of loops. WARNING: This approach is not robust enough to put it anywhere in production, but to write quick one off scripts is a killer. Experimenting in a shell and creating tools and 2nd order tools to make interaction faster builds a language that grows on you, and keeps improving your toolbelt. ### 4.23 The Toplevel Is Hopeless Shellscripts are thought as quick one-off programs, but when they are useful, they are sticky, so you better write them from the start as if it would be permanent. The upfront cost is very low anyway. Structure the script like a regular app. Bash is extremely permissive in what it allows to be coded and ran. By default, failures do not make the program exit or throw an exception (no exceptions). And for some reason, the common usage of shellscripts is to put everything in the top level. Don't do that. Do the least possible things in the toplevel. A way to improve the defaults, is setting a bunch of flags that make the script stricter, so it fails on many situations you'd want to stop anyway because something went wrong. #!/usr/bin/env bash set -eEuo pipefail shopt -s inherit_errexit main() { parse_args validate_args do_things cleanup } main "[email protected]"  ### 4.24 Check your deps Giving useful information to the users will help them using the script, and you debugging it. Script dependencies is a common use case that we'll do it in a nice way. deps() { for dep in "[email protected]"; do mute command -v "$dep" || die "$dep dependency missing" done } main() { deps jq curl # ... }  ### 4.25 source files source is like require or import in some programming languages. It evaluates the sourced file in the context of the current script, so you get all definitions in your environment. It's simple, but it helps you get used to modularize your code into libraries. Be careful, it's very rudimentary, and it will be overwriting old vars or functions if names clash. There's no namespacing happening there. source file.sh # the same . file.sh  ### 4.26 Use Scripts as a Libs A python-inspired way of using scripts as loadable libraries is to check whether the current file was the one that was called originally or it's being just sourced. Again, no side effects in load time makes this functionality possible. otherwise, you're on your own. # Allow sourcing of this script if [[$(basename "$(realpath "$0")") == "$(basename "${BASH_SOURCE}")" ]]; then
setup
parse_args "[email protected]"
main
fi


### 4.27 Tmpfiles Everywhere

Your script is not going to run alone. Don't assume paths are fixed or known.

CI/CD Pipelines run many jobs in the same node and files can start clashing.

Make use of $(mktemp -d /tmp/foo-bar.XXXXX). If you have to patch a file, do it in a clean fresh copy. Don't modify files in old paths If you HAVE TO modify paths, do it idempotently. But really, don't do it. git_clone_tmp() { local repo=${1:?repo is required}
local ref=${2:?ref is required} tmpath=$(mktemp -d "/tmp/cloned-$repo-XXXXX") on_exit "rm -rf$tmpath"
git clone -b ${ref}$repo $tmpath }  CAVEAT: You have to manually delete the directory if you want it cleaned. Here's an article with very good advice on tempfiles. ### 4.28 Cleanup tasks with trap trap is used to 'subscribe' a callback when something happens. Many times it's used on exit. It's a good thing to cleanup tmpdirs after your script exits, so you can use the output of mktemp -d and subscribe a cleanup function for it. on_exit() { rm -rf$1
}
local tmpath=$(mktemp -d /tmp/foo-bar.XXXXX) trap "on_exit$tmpath" EXIT SIGINT


### 4.29 array of callbacks on_exit

Level up that pattern, we can have a helper to add callbacks to run on exit. Get used to these kind of patterns, they are super powerful and save you lots of manual bookkeeping.

ON_EXIT=()
EXIT_RES=

function on_exit_fn {
EXIT_RES=$? for cb in "${ON_EXIT[@]}"; do $cb || true; done return$EXIT_RES
}

trap on_exit_fn EXIT SIGINT

function on_exit {
ON_EXIT+=("[email protected]")
}

local v_id=$(docker volume create) on_exit "docker volume rm$v_id"
# Use your v_id knowing that it'll be available during your script but
# will be cleaned up before exiting.


### 4.30 stacktrace on error

Here's a nice helper for debugging errors in bash. In case of non-0 exit, it prints a stacktrace.

set -Eeuo pipefail
trap stacktrace EXIT
stacktrace() {
rc="$?" if [$rc != 0 ]; then
printf '\nThe command "%s" triggerd a stacktrace:\n' "$BASH_COMMAND" for i in$(seq 1 $((${#FUNCNAME[@]} - 2))); do
j=$((i+1)); printf '\t%s: %s() called in %s:%s\n' "${BASH_SOURCE[$i]}" "${FUNCNAME[$i]}" "${BASH_SOURCE[$j]}" "${BASH_LINENO[$i]}"; done fi }  ### 4.31 Dots and colons allowed in function names! A way to split the namespace is to have libs define functions with their own namespace. I've gotten used to use dots or colons as namespace separator. semver.greater() { # ... }  or semver:greater() { # ... }  ### 4.32 make steps of the process as composable as possible by using "[email protected]" By using [email protected] to pass commands as parameters around you can get to a degree of composability that allows for a nice chaining of commands. Here's a very simple version of watch. See how you can every 2 ls -la. I think that style is called Bernstein Chaining. But I'm not sure if it's exactly the same. It also looks like currying or partial evaluation to me if you squint a little bit. every() { secs=$1
shift
while true; do
"[email protected]"
sleep $secs; done }  As you know by now, bash doesn't pass blocks of code around, but the alternative is to pass function names. mute() {$@ >/dev/null 2>/dev/null
}
mute ls


So now we can create the most useless command composition ever:

every 1 mute echo hi
#or
mute every 1 echo hi


For the particular redirection problem, another option is to use aliases. Redirects can be written anywhere on your CLI (not just at the end), so the following will work using a plain alias:

alias mute='>/dev/null 2>/dev/null'
mute ls


### 4.33 do_times/foreach_*

shellscripts are highly side-efffecty, and even though the scoping of variables is not very empowering, you can get a limited amount of decomposition of loops by passing function names.

This is a lame example, but I hope it shows the use case, it allows you to group already existing functions while taking advantage of a fixed looping iterator, and leaving traces of the current loop vars in the global "variable" environment.

create_user() {
uname="u$1" # leave uname in the global env so later functions see it http :8080/users name="$uname"
}

create_pet() {
pname="p$1" http :8080/users/$uname/pets name="$pname" } create_bundle() { create_user$1
create_pet $1 } do_times() { local n=$1; shift
for i in $(seq$n); do
"[email protected]" $i done } do_times 15 create_bundle  A bit more complex is runnning a command to every repo in an org: run_tests() { ./ci/test.sh } foreach_repo_with_index() { local counter=0 local repos=$(http https://api.github.com/users/$1/repos) shift for entry in$(echo $repos | jq -r '.[].git_url'); do (git_clone_tmp$entry master
cd $tmpath "[email protected]"$counter $entry ) ((counter=counter+1)) done } foreach_repo_with_index kidd run_tests  ### 4.34 <(foo) and >(foo) Some commands ask for files as inputs. And sometimes you have that file, but sometimes you're only creating that file to pass it to the command. In those cases, creating temporary files is not necessary if you use <(cmd). Here's a way to diff the output of 2 commands without putting them in a temporary file. diff <(date) <(date) diff <(date) <(sleep 1; date)  The same happens with outputs. Commands that ask you for a destination file. You can trick them by using >(command) as a file. A nice trick is to use >(cat) to know what's going on there. Also useful to send stuff to the clipboard >(xclip) before running something on the output. What the shell does in those cases is to bind a file descriptor of the process created inside < or > to the first process. You can experiment with those using commands like echo <(pwd). In Zsh you can use m-x expand-word to see the file descriptors being expanded. A way to peek into a huge pipe is to tee >(cat) ### 4.35 Modify a file on the fly, without changing it on disk If you want to use a slightly modified version of a file for a single use, and then throw it away, consider the following: Everywhere that you should pass file, you could pass <(cat orig_file) instead, because they have the same content, only the second version is ephemeral. If you want a modified version of it, we can attach more commands to the subshell. Example of a command that reuses your ~/.psqlrc and adds a line in the end to make the session read-only. ropsql() { PSQLRC=<( cat ~/.psqlrc && echo 'set session characteristics as transaction read only;') \ psql "[email protected]" }  ### 4.36 Use xargs Continuing with other ways of plumbing commands into other commands, there's xargs. Some commands work seamlessly with pipes, by taking inputs from stdin and printing to stdout. But some others like to work with files, and they ask for their parameters in their args list. For example, evince. It wouldn't be even expected to cat a pdf and pass it to evince through stdin. In general, to convert from this pattern: cmd param to echo param| cmd, xargs can be helpful. Look at its man page to know how to split or batch args in multiple cmd calls. Xargs is helpful for parallelizing work. You should look at its man page, but just know it can help in running parallel processes (check -P in its man). Other tips on this great Guide to xargs. ### 4.37 xargs + paste paste can be thougth as zip, interleaving the outputs of several commands line by line. paste <(./cmd1) <(./cmd2) | xargs -L1 ./cmd3  ### 4.38 Scripts as filters Strive to create scripts that can be used as filters. Perl had while(<>) { ... } that would open a file line by line, or get input from stdin depending on the actual arguments to the file. In shellscripting, we can simulate (part of) it using while IFS= read -r line do echo "$line"
done < "${1:-/dev/stdin}"  Look here for more detailed explanations and variants. ### 4.39 change loops for "mapping/reducing" functions #### 4.39.1 find Many times we want to run the same operation or test to lots of files. Instead of looping for each file, think if find -exec would solve it. Also, find supports multiple directories. dirs=("/usr/local/bin" "/usr/bin") for d in "${dirs[@]}"; do
for f in $(find "$d"); do
echo "check if owner of $f is johndoe and group is johndoe" [ stat -c %U:%G$f == "johndoe:johndoe" ] || die "error"
done
done


Compare it to:

[ $(find "$dirs[@]" -exec stat -c '%U:%G' {} \; | grep -vc "johndoe:johndoe") == "0" ] || die "error"


Other examples might be:

# count all lines of all docx in this dir
find . -type f -name "*docx" -exec pandoc "{}" -t plain \; | wc -l

#All your files have the same owner and group permissions
[ $(find "$files[@]" -exec stat -c '%a' {} \; | grep -Evc "^(.)\1") == "0" ]


#### 4.39.2 grep -Fvf

Three magical flags that go well together.

• -F Interpret the "pattern" as a Fixed string, not a pattern/regex
• -v Negate the output. Print non matching lines.
• -f The patterns to match are taken from a file.

The cool thing about combining -f and -v is that the negative matches mean "lines that are not ANY of the ones in the pattern file". So you can do list diffing. like sort + diff but more flexible.

Here's a practical case of finding version numbers that we have a git tag for, that do not have a title in the readme.

f="readme.md"
! grep -Fvf <(grep -P "^# \d\.\d\.\d\.\d$" "$f" | sed -e 's/^# //') \
<(git tag | grep -P "^\d\.\d\.\d\.\d$")  #### 4.39.3 grep -Pzo Three flags that also combine pretty nicely. With those, we can match multiple lines using plain old grep. This is how I get only the table structure of a postgres database. pg_dump -s | grep -Pzo "CREATE TABLE [^;]*;\n"  More info on this stackoverflow thread. Use of this pattern will use \0's instead of \n, which is good for the grepping, but maybe it's not good for your output. You can convert back \0's to \n with tr. pg_dump -s | grep -Pzo "CREATE TABLE public.($tables) [^;]*;\n" | tr '\0' '\n' | ...


Alternatively, depending on your requirements, you can leverage awk, with awk '/CREATE TABLE/,/;/', that won't suffer from the \0 problem. But then you need to explain the awk model to your coworker.

#### 4.39.4 Set operations

There are lots of other "set level" operations you can perform on files/streams using basic unix tools.

This cheatsheet contains lots of them, which you should go read one by one, because bash, appart from being useful as it is, also has an Iversonian suggestivity that gets more useful with time.

### 4.40 jq

Jq is more powerful than you probably think. It's not just to fetch a value deep into a json dictionary.

You can fetch and transform values, and interpolate values inside a string template:

echo '{"a":1,"b":2}' | jq '. | "a is $$.a), and b is \(.b)."'  Or use this in a map: echo '[{"a":1,"b":2},{"a":3,"b":4}]' | jq -r '. |map("a is \(.a), and b is \(.b).")[]'  Maybe a little more spicy: echo '[{"host":"host1.com","user":"bob"},{"host":"host2.com","user":"alice"}]' | jq 'map("scp \(.user)@\(.host):/tmp/remote-file /tmp/local-file")[]' -r | xargs -d"\n" -n1 sh -c  And, make sure to read about jq functions. for example, reading nested json echo '{"nested":"{\"a\":2}"}' | jq '.nested | fromjson | .a '  You can also edit values in place echo '{"date":1643192480}' | jq '.date|=todateiso8601' # {"date": "2022-01-26T10:22:48Z"}  And we can generalize it into a filter that updates many date fields join_by() { local IFS="1"; shift; echo "*"; } # usage: echo '[{"foo":1234567890,"bar":1234567891}]' | jq_pretty_dates '.[].foo' '.[].bar' # => [{"foo":"2009-02-13T23:31:30Z","bar":"2009-02-13T23:31:31Z"}] jq_pretty_dates() { # From the default ([email protected]) append every element (/%/) with # |=todateiso8601). That, joined by |. And that becomes the "filter" to jq. jq "(join_by "|" "{@/%/|=todateiso8601}")" }  There are quite a few interesting commands in this AWS+JQ post. Some other cool tips from This HN thread: echo "FFFF\nDDDD" | jq -R # reads raw text as strings. 1 line -> 1 string echo "FFFF\nDDDD" | jq -R 'capture("(?<item>.*)")' # Capture groups as json elements  You can get pretty advanced with jq, and some say it's a decent substitute for sed as a line oriented editor. Some more advanced tutorials here and here. ** ### 4.41 pass flags as a splatted array There's quite a bit to chew on this example. First of all, the core pattern is to build up your commandline options with an array, and splat it in the final command line. For complex commands like docker where you easily have 10+ flags it's a visual aid, and also opens up the opportunities for reusing or abstracting sets of options to logical blocks. Once it's an array, we can add elements conditionally to that array depending on the current run, and build the line that we'll be running in the end. # Allows Ctrl-C'ing on interactive shells INTERACTIVE= if [[ -t 1 ]]; then INTERACTIVE="-it"; fi local flags=( # We mount it as read-only, so we make sure we are not writing anything # in there, and that everything is explicitly defined "-v LOCAL_PATH/build-dir:/build-dir:ro,delegated" "-v OUTPUT_DIR:/output:rw,consistent" "-v tmp_dir:/tmp/work:rw,delegated" ) if [[ -n LOCAL_PATH ]]; then flags+=("-v (realpath LOCAL_PATH)/overrides/my-other-file:/build-dir/build.json:ro") flags+=("-e LOCAL_PATH=/tmp/local") fi local v_id=(docker volume create) flags+=("-v v_id:/tmp/build") on_exit "docker volume rm v_id" docker run --rm INTERACTIVE {flags[*]} image touch /tmp/build/foo.txt docker run --rm INTERACTIVE {flags[*]} fpm:latest fpm-build /tmp/build/foo.txt on_exit "chown_cache tmp_dir"  In this example we see another cool trick. Mounting a volume in 2 differrent containers, so not for the purpose of sharing a local file/dir with the host but to share it between themselves. In that case, the 2 containers don't even coexist temporarily, but use the volume as a conveyor belt, passing it from container to container, and each one applies "its thing". After all the mess, someone has to cleanup everything, but we know how to do it with on_exit trick. ### 4.42 inherit_errexit bash 4.4+ , you can shopt -s inherit_errexit, and subshells will inherit the errexit flag value. meaning that if you set -Ee, anything that runs inside a subshell will throw an error at the moment any command exits with !=0. ### 4.43 GNU Parallel I can't recommend parallel enough. The same as xargs, but in a much more flexible way, parallel lets you run various jobs at a time. If you have this tool into account, it doesn't just speed up your runtimes, but it will force you write cleaner code. Parallel execution will test your scripts so if they are not using randomized tmp working directories, things will clash, etc… Parallel in itself is such a hackerfriendly tool it deserves to be deeply learned. You can use it just locally to run a process per core, you can send jobs to several machines connected via a simple ssh, you can bind tmux or sqlite to it, or you can write a trivial job queuing system. Man pages and official examples are a goldmine. ### 4.44 HEREDOCS • Basic usage of heredocs:  echo <<EOF interpolated \non_interpolated EOF  • A dash after << replaces trailing spaces in here docs echo <<-EOF var there EOF  • quoting the identifier disables interpolation of variables echo <<'EOF' non_interpolated there EOF  The bash manual is super concise and to the point there. The most complex case is having a heredoc which contains some bash code that is ment to run remotely, and wanting to interpolate some variables in the local env, and some in the remote one. Escaping is enough for regular vars, but if you want to use special (1, !, ?…) vars, check this out: deploy () { local deploy_dir="1" ssh server1 'bash -s' <<EOSSH echo "deploying => {deploy_dir}" ls -tdr ~/my-project/artifacts/* | head -n -5 | xargs rm -rf # remove all but latest 5 directories ln -nfs "\HOME/my-project/artifacts/{deploy_dir}/my-project-0.1.0-SNAPSHOT-standalone.jar" "\HOME/my-project/artifacts/current.jar" cat ~/my-project/artifacts/current.pid | xargs kill java -jar ~/my-project/artifacts/current.jar &>/dev/null & lastpid=\(echo \!) echo \lastpid > ~/my-project/artifacts/current.pid EOSSH }  ### 4.45 HERESTRINGS It's the stripped down version of HEREDOCS. Inline a single string (or output of a single command) as an input string. It's kinda similar to what you could do with a pipe. cat <<<"HELLO" cat <<<(echo "HELLO") echo "ECHOPIPE" | /bin/cat echo "ECHOPIPE" | /bin/cat <(seq 5) echo "ECHOPIPE" | /bin/cat <(seq 5) - echo "ECHOPIPE" | /bin/cat <(seq 5) <<<"HERESTRING" echo "ECHOPIPE" | /bin/cat <(seq 5) - <<<"HERESTRING"  ### 4.46 __DATA__ I loved the Perl __END__ and DATA, features and realized it's possible to do it in shellscripts. You can append to the current file. Here's an example of a super simple bookmark "manager": #!/usr/bin/env sh cmd_add() { shift echo "[email protected]" >> "0" } cmd_go() { sed '0,/^__DATA__/d' "0" | dmenu -i -l 20 | rev | cut -f1 -d' ' | rev | xargs xdg-open } main() { cmd_{1:-go} @ } main @ exit __DATA__ r/emacs https://www.reddit.com/r/emacs  ### 4.47 Simple Templating For trivial templating, there's no need for any external tool except for just variable interpolation. This is quite obvious, but I use it quite often to generate repetitive bash code itself #!/usr/bin/env bash is=("obj1" "obj2") js=("resource1" "resource2") for i in "{is[@]}"; do for j in "{js[@]}"; do echo "insert into t (obj, resource) values ('i', 'j');" done done  ### 4.48 Secrets As, Smallstep article explains, you should be careful when passing around secret data like tokens between processes. Env vars are not really safe, and there are a few tricks you can use to cover your assets. ### 4.49 Escape single quotes in single quoted strings Escaping single quoted strings doesn't work the way you'd think. # does not work a='hi \'bob\''  Use '' strings like: # works! a='hi \'bob\'' echo a  Extra explanations: StackOverflow ## 5 Interactive ### 5.1 Save your small scripts Rome wasn't built in a day, and like having a journal log, most of the little scripts you create, once you have enough discipline will be useful for some other cases, and your functions will be reusable. Save your scripts into files early on, instead of crunching everything in the repl. learn how to use a decent editor that shortens the feedback cycle as much as possible. ### 5.2 Increased Interactivity Knowing your shell's shortcuts for interactive use is a must. The same way you learned to touchtype and you learned your editor, you should learn all the shortcuts for your shell. Here's some of them. key action Ctrl-r reverse-history-search C-a beginning-of-line C-e end-of-line C-w delete-word-backwards C-k kill-line (from point to eol) C-y paste last killed thing A-y previous killed thing (after a c-y) C-p previous-line C-n next-line A-. insert last agument A-/ dabbrev-expand A written form of A-. is _. It retains the last argment and puts it in _. test -f "FILE" && source "_". ### 5.3 Aliases Aliases are very simple substitutions of commands for a sequence of other commands. Usual example is alias ls='ls --auto-color'  Now let's move on to the interesting stuff. ### 5.4 functions can generate aliases Aliases live in a global namespace for the shell, so no matter where you define them, they take effect globally, possibly overwriting older aliases with the same name. Well, it's not lexical scope (far from it), but using aliases you can create a string that snapshots the value you want, and capture it to run it later. Some fun stuff: • aliasgen. Create an alias for each directory in ~/workspace/. This is superceeded by CDPATH, but the trick is still cool. aliasgen() { for i in ~/workspace/*(/) ; do DIR=(basename i) ; alias DIR="cd ~/workspace/i"; done } aliasgen  • a make a shortcut to the current directory. function a() { alias 1=cd\ PWD; } mkdir -p /tmp/fing-longer cd /tmp/fing-longer a fl cd / fl echo PWD # /tmp/fing-longer  A man can dream… • unhist. functions can create aliases, and functions can receive functions as parameters (as a string (function name)), so we can combine them to advise existing functions. unhist () { alias 1=" 1" } unhist unhist unhist grep unhist rg noglobber() { alias 1="noglob 1" } noglobber http noglobber curl noglobber git  • Problem: These commands do not compose. Combination of 2 of those doesn't work, because the second acts just on the textual representation that it received, not the current value of the alias. ### 5.5 Override (advise?) common functions Overriding commands is generally a bad practice as it violates the principle of least surprise, but there might be occasions (mostly in your local machine) where you can integrate awesome finetunnings to your toolbelt. Here we're going to get the original docker binary file location. After that we declare a function called docker that will proxy the parameters to the original docker program UNLESS you're calling docker run. In that case, we're injecting a mouted volume that mounts /root/.bash_history of the container to a file hosted in the host (duh). That's a pretty cool way of keeping a history of your recent commands in your containers, no matter how many times you start and kill them. DOCKER_ORIG=(which docker) docker () { if [[ 1 == "run" ]]; then shift DOCKER_ORIG run -v HOME/.shared_bash_history:/root/.bash_history "[email protected]" else DOCKER_ORIG "[email protected]" fi }  I'm particularly fond of this trick, as it saved me tons of typing. But at a personal level, it was mindblowing that sharing this around the internet caused the most disparity of opinions. Also, I recently read the great book "Docker in Practice" by Ian Miell and there's a snippet that is 99.9% like the one I created myself. That was a very cool moment. ### 5.6 Faster iteration on pipes When testing complex pipelines: • Make them pure (no side effects). • One command per line. • End lines with the pipe character. • During development, end the pipeline with cat. I usually use watch -n1 'code.sh' in a split window so I see the results of what I'm doing. The advantage of curl https://www.example.com/videos/ | pup 'figure.mg > a attr{href}' | head -1 | xargs -I{} curl -L "https://www.example.com/{}" | pup 'script' | grep file: | sed -e "s/.*\(http[^ \"']*$$.*/\1/"             |
# xargs vlc                                       |
cat


Over

curl https://www.example.com/videos/                \
| pup 'figure.mg > a attr{href}'                  \
| xargs -I{} curl -L "https://www.example.com/{}" \
| pup 'script'                                    \
| grep file:                                      \
| sed -e "s/.*$$http[^ \"']*$$.*/\1/"             \
# xargs vlc   # doesn't work


Is that you can comment out lines on the former one, but you can't do that on the latter. The cat trick makes it so that you have an 'exit' point, and you don't have to comment that one. Also, some editors will indent the first one correctly, while you'll have to manually indent the second one.

Small wins that compose just fine :)

### 5.8 Idempotent functions

"My favourite shell scripting function definition technique: idempotent functions by redefining the function as a noop inside its body:

(The true; body is needed by some shells, e.g. bash, and not others, e.g. zsh.) " – chrismorgan

foo() {
foo() { true; }
echo "This bit will only be executed on the first foo call"
}


## 6 Debugging

### 6.1 adding bash to a script to debug

You can add bash inside any script, and it'll add a sort of a breakpoint, allowing you to check the state of the env and manually call functions around.

If you orgainse your code in small functions, it's easy to add breakpoints by just spawning bash processes inside your script.

This works also inside docker containers (if you provide -ti flag on run).

Let's see some usual uses of docker and how we can debug our scripts there:

# leaves you at a shell to fiddle if all is in place after build
docker run -it mycomplex-image bash

# Runs /tmp/file.sh from the host inside. That's cool to make the
# container less hermetic. Even if the image is not originally ment
# to, you can even override it and 'monkeypatch' the file with the one
# from the host anyway.
docker run -it -v $PWD:/tmp/ mycomplex-image /tmp/file.sh # So now you can really add wtv you want there. echo 'bash' >>$PWD/file.sh

# run+open shell at runtime to inspect the state of the script
docker run -it -v $PWD:/tmp/ mycomplex-image /tmp/file.sh  ### 6.2 DRY_RUN if [[-n "$DRY_RUN" ]]; then
curl () {
echo curl "[email protected]"
}
fi


use command curl to force the command, not the alias or anything

If you have many functions to mock, and you want to overabstract (bad thing):

mock() {
for m in ${MOCKS[@]//,/ }; do eval "$m() { echo \"mocked $m\" "\$@"; }"
done
}

MOCKS=curl,ls script.sh


### 6.3 Cheap debugging flag

optargs "V" option; do
tee >(sed -e "s/^/[$msg] /" 1>&2) } alias -g 'PL'=' |plog ' #zsh only echo "a\nb" PL foo | tr 'a-z' 'A-Z' PL bar # output: # [foo] a # stderr # [foo] b # stderr # A # stdout # B # stdout # [bar] A # stderr # [bar] b # stderr  ### 6.5 tee+sudo If you wat to store a file in a root-owned dir, in the middle of your pipeline, instead of running the whole thing as root, you can use sudo tee file: ls | grep m >/usr/local/garbage # fail ls | grep m | sudo tee /usr/local/garbage # success!  ### 6.6 quoting Bash: To get a quoted version of a given string, here's what you can do: # this is my "string" I want to 'comment "on"' !:q  That gives us '#this is my "string" I want to '\''comment "on"'\'''. Neat! I just found this trick here. From the associated HN thread: function bashquote () { printf '%q' "$(cat)"
echo
}


Zsh: If you're on zsh, a-' quotes the current line.

## 7 zsh-only

### 7.1 Word spliting

Word splitting works differently by default in zsh than in bash.

foo="ls -las"
$foo  This works in bash, but zsh will not split by words. To make zsh expand by words, there are 2 ways: setopt SH_WORD_SPLIT and ${=foo}. zsh has unsetop command, which allows to scope where you want the expansions to happen. unsetop SH_WORD_SPLIT.

The problem with both solutions is that none of them are compatible with bash, so you'll be cornering yourself to "this only works in zsh". A way to overcome this is to use arrays, which are expanded in the same way in both shells.

Or, use the same hack as you'll see later with noglob.

Refs:

### 7.2 globbing

In zsh, getting a list of files that match some characteristics is doable using globbing. Bash has globbing also, but in a less sophisticated way.

The basic structure of a glob is pattern(qualifiers). Patterns can contain:

• strings: they do exact match
• wildcards: *, ?, **/
• character classes: [0-9]
• choices: (.pdf|.djvu)

The qualifiers are extra constraints you put on the matches. There are lots of different qualifiers. Look at zshexpn for the complete list. The ones I use more are:

• . Files
• / Directories
• om[numberhere]. Nth latest modified

### 7.3 Global aliases:

Zsh has 3 kinds of aliases: normal, global, and suffix. Normal ones behave the same as in bash: They expand only in the first token of a line.

alias foo=ls
foo foo # -> ls: cannot access 'foo': No such file or directory


Global aliases expand anywhere in your cli, and they can expand to anything.

alias  -g foo=ls
foo foo # -> ls: cannot access 'ls': No such file or directory


These are some aliases I have in my ~/.zshrc that help me use a shell in a more fluid way.

alias -g P1='| awk "{print \$1}"' alias -g P2='| awk "{print \$2}"'
alias -g P3='| awk "{print \$3}"' alias -g P4='| awk "{print \$4}"'
alias -g P5='| awk "{print \$5}"' alias -g P6='| awk "{print \$6}"'
alias -g PL='| awk "{print \$NF}"' alias -g PN='| awk "{print \$NF}"'
alias -g TL='| tail -20'
alias -g T='| tail '
alias -g T1='T -1'
#alias -g tr='-ltr'
alias -g X='| xclip  '
alias -g TB='| nc termbin.com 9999 '
alias -g L='| less -R '
alias -g LR='| less -r '
alias -g G='| grep '
alias -g GI='| grep -i '
alias -g GG=' 2>&1 | grep '
alias -g GGI=' 2>&1 | grep -i '
alias -g GV='| grep -v '
alias -g V='| grep -v '
alias -g TAC='| tac '
alias -g DU='du -B1'

alias -g E2O=' 2>&1 '
alias -g NE=' 2>/dev/null '
alias -g NO=' >/dev/null '

alias -g WC='| wc -l '

alias -g J='| noglob jq'
alias -g JQ='| noglob jq'
alias -g jq='noglob jq'
alias -g JL='| noglob jq -C . | less -R '
alias -g JQL='| noglob jq -C . | less -R '
alias -g XMEL='| xmlstarlet el'
alias -g XML='| xmlstarlet sel -t -v '

alias -g LYNX="| lynx -dump -stdin "
alias -g H2T="| html2text "
alias -g TRIM="| xargs "
alias -g XA='| xargs -d"\n" '
alias -g XE="| xargs e"
alias -g P="| pick "
alias -g PP="| percol | xargs "
alias -g W5="watch -n5 "
alias -g W1="watch -n1 "

alias -g CB="| col -b "
alias -g NC="| col -b "
alias -g U='| uniq '
alias -g XT='urxvt -e '
alias -g DMV='| dmenu -i -l 20 '

alias -g ...='../..'
alias -g ....='../../..'
alias -g .....='../../../..'

alias -g l10='*(om[1,10])'
alias -g l20='*(om[1,20])'
alias -g l5='*(om[1,5])'
alias -g l='*(om[1])'
alias -g '**.'='**/*(.)'
alias -g lpdf='*.pdf(om[1])'
alias -g lpng='*.png(om[1])'

alias -g u='*(om[1])'

alias lsmov='ls *.(mp4|mpg|mpeg|avi|mkv)'
alias lspdf='ls *.(pdf|djvu)'
alias lsmp3='ls *.mp3'
alias lspng='ls *.png'


Now, some sequences of words can start making sense:

• lspdf -tr TL DM XA evince
alias -g DOCK='$(docker ps 2..N P P1)' docker stop DOCK # yay!  So, you can bind words to expansion-time results of the aliases. It feels like a very powerful thing, to have this "compile time" expansions. Reminds me of CL's symbol-macrolet, or IMMEDIATE Forth words. ### 7.5 Autocomplete Writting smart autocompletion scripts is not easy. zsh supports compdef _gnu_generic type of completion, which gets you very far with 0 effort. When autocompleting after a - in the commandline, if your command is configured like compdef _gnu_generic mycommand, zsh will call the script with --help and parse the output, trying to find flags, and will use them as suggestions. It's really great. The compromise is to write a decent "–help" for your script. Which is cool because your user will love it too, and you just have to write it once. The completion is not context aware though, so you can't autocomplete flags after the first non-flag argument. It seems this could be improved in zsh-land, by asking for the –help like mycommand args-so-far --help. But it doesn't work like that. #!/usr/bin/env bash # The script can be bash-only, while the completion work in zsh-only set -Eeuo pipefail help() { echo " -h,--help Show help" echo " -c,--command Another thing" } if [ "$1" == "--help" ];
help
fi


Now you can play with mycommand -<TAB>. Amazing, wow.

### 7.6 Create helpers and generate global aliases automagically

Borrowing a bit from Perl, a bit from Forth, and a bit from PicoLisp, I've come to create a few helpers that abstract words into a bit higher level concepts. Unifying the option selectors is one, and then, other line oriented operations like chomp, from, till.

pick() {
if [ -z "$DISPLAY" ]; then percol || fzf || slmenu -i -l 20 else dmenu -i -l 20 fi } alias -g P='| pick' globalias() { alias -g echo -n$1 | tr '[a-z]' '[A-Z]'=" | $1 " } globalias fzf # uniquify column function uc () { awk -F" " "!_[\$$1]++" } globalias uc function from() { perl -pe "s|.*?$1|\1|" }
globalias from

function till() { sed -e "s|$1.*|$1|" }
globalias till



### 7.10 glob nested expansion

In https://news.ycombinator.com/item?id=26175894 there's a nice advanced example:

Variable expansion syntax, glob qualifiers, and history modifiers can
be combined/nested quite nicely. For example, this outputs all the
commands available from $PATH: echo${~${path/%/\/*(*N:t)}}. ${~foo} is to enable glob expansion on the
result of foo. ${foo/%/bar} substitutes the end of the result of foo to "bar" (i.e. it appends it); when foo is an array, it does it for each element. In /*(*N:t), we're adding the slash and star to the paths from $path, then the parentheses are glob qualifiers. *
inside means only match the executables, N is to activate NULL_GLOB
for the match so that we don't get errors for globs that didn't match
anything, :t is a history mod used for globs that returns just the
"tail" of the result, i.e. the basename. IIRC, bash can't even nest
multiple parameter expansions; you need to save each step separately.


### 7.11 Some extra shortcuts for nice things

• alt-' quotes the current line. It's like quotemeta. great to help you fight double and triple quoting when writing scripts.
• alt-# comment/uncomment and execute. Nice way to store the current line for later and reach out to it again to run it for real.
• ctrl-o kill-current-line, wait for a command, and paste.

### 7.12 =()

Zsh has <() and >() like Bash, but it also has =(). This varant is similar to <() but instead of creating a temporary pipe, it creates a temporary file. That is useful if we want to run commands that require a file instead of a pipe (most times, because it uses lseek to go through it).

Node is an example of this.

node <(echo 'setTimeout(() => console.log("foo"), 400)')   # fails
node =(echo 'setTimeout(() => console.log("foo"), 400)')   # works!


Or,

docker run --rm -ti -v =(echo "OHAI"):/tmp/foo ubuntu cat /tmp/foo


## 8TODO patterns

### 8.1 just use cat/netcat/pipes with <()

• input

python logger.py executable will run the executable and monitor it for error messages. Depending on the error messages it will be doing.

In order to test it, I want to run it with my own output. So what I do is python logger.py cat. That way I can type my stuff there, and even better, I can use a stream from the shell. myexecutable | python logger.py cat still works.

#### 8.1.1 what's the unifying theory behind all that?

It's still not clear to me how they relate, but the feeling is that there's a common thread ruling all those commands. as if they generalize over the same things, or just a couple of very interrelated things.

echo is to cat what | is to xargs. and <() and >() are able to make static files be dynamic streams. putting cat and echo inside <() seem like either a noop, or a leap in what can be done there. Still have to figure it out.

<(grep a file.txt) , | xargs , cat, echo

 you-have\it-wants executable file stream executable X <(exe) exe | file <(cat file) X cat file | stream cat <(grep foo file.txt) X
• output

Most of those can be tested with and tee. Sometimes you would like the output to be an output to a file to be extramassaged.

 you-have\it-wants executable file stream executable X >() file X stream >(cat) X

lnav <(tail -F /my/logfile-that-gets-rotated-or-truncated.log) cat <(date)

## 11 Credits

Emacs 26.1 (Org mode 9.1.9)

Validate